Power cable
Binder M12 763 series, A-coded, order code 25189 79-3540-12-05
5*0.25mm² (23 AWG), PVC, 2m
| Net name | Pin number | Wire color |
|---|---|---|
| VDD_DUT1 | 1 | brown |
| VDD_DUT2 | 2 | white |
| VDD | 3 | blue |
| GND | 4 | black |
| GND_DUT | 5 | grey |
| GND_SHIELD | housing | braid/green/green-yellow |
The GND_SHIELD connection requires the connector nut screwed into the bolt and the bolt pushed to the spring in the molded PCB connector. If the PCB is operated without a case, a clamp must be used to hold the bolt and spring together for good contact.
Console cable
FTDI USB to 3.3V TTL UART cable with 2.54mm headers, order code TTL-232R-RPi.
Cable datasheet
I/O pins of FTDI converter use 3.3V, but are 2.5/5V compatible.
| Net name on PCB | Wire name on USB cable | Wire color |
|---|---|---|
| MIO_UARTRX | TX | red |
| MIO_UARTTX | RX | yellow |
| GND | GND | black |
JTAG cable
7x2 pin, 2mm pitch, shrouded keyed header. Compatible to Xilinx Platform Cable JTAG programmer, order code HW-USB-II-G, with ribbon cable, order code HW-RIBBON14.
The pinout is according to the Xilinx JTAG standard.
| Net name on PCB | Wire name on JTAG programmer | Pin number |
|---|---|---|
| GND | - | 1 |
| VIO_MIO | VREF | 2 |
| GND | GND | 3 |
| JTAG_TMS | TMS | 4 |
| GND | GND | 5 |
| JTAG_TCK | TCK | 6 |
| GND | GND | 7 |
| JTAG_TDO | TDO | 8 |
| GND | GND | 9 |
| JTAG_TDI | TDI | 10 |
| GND | GND | 11 |
| - | - | 12 |
| GND | PGND | 13 |
| PS_SRST# | HALT | 14 |
Latest revision: 10.05.2016
